WiFi Mode Connection Recent

1. WiFi Mode Connection Steps

1. The phone needs to first use a USB cable to successfully project the screen
2. Refer to the USB connection tutorial
3. Turn on WiFi on the phone and successfully connect to the network
4. The WiFi connected to the phone and the network connected to the computer must be in the same local area network
5. Right-click the small screen and click [Switch to WIFI mode]
6. After successful transfer, the word "WIFI" will be displayed in the upper left corner

2. How to Change USB Mode to WiFi Mode

1. Right-click the small screen and a pop-up window will appear
2. Click the button to switch to WIFI mode, and the selected device will start to switch modes
3. After conversion is successful, the word "WIFI" will be displayed in the upper left corner

Prerequisites

1. The mobile phone must be connected to WiFi
2. The WiFi network connected to the phone must be in the same LAN as the network of the host computer

3. Switch All Phones to WiFi Mode in Batches

In Panda, press Ctrl+A to select all phones. Then click "More" on the right and click Wi-Fi mode.

4. Unable to Switch to WiFi Mode?

1. Is the router connected to the computer the same as the router connected to your phone?
2. Is the network between the computer and the phone interoperable? Follow these steps:
   • Press Win+R on the computer keyboard
   • Enter cmd in the pop-up run window and press Enter
   • Enter ping 192.168.1.112 in the terminal (replace with the real IP address of your phone)